Water-based inorganic mineral exterior wall coating (GW-W6010)

This product uses natural mineral raw materials such as silicates, processed through a special production process. The main component is potassium silicate modified by oxidation. The inorganic substances in the coating and the inorganic substances in the substrate undergo a silicification reaction to produce new inorganic substances, which penetrate the base layer and integrate with the substrate. Based on the above principles, Gobayer inorganic coatings are naturally environmentally friendly, fire-retardant, acid and alkali resistant, aging resistant, and have ultra-strong weather resistance.

This product uses natural mineral raw materials such as silicates, processed through a special production process. The main component is potassium silicate modified by oxidation. The inorganic substances in the coating and the inorganic substances in the substrate undergo a silicification reaction to produce new inorganic substances, which penetrate into the base layer and integrate with the substrate. Based on this principle, Gobayer inorganic coatings are naturally environmentally friendly, fire-retardant, acid and alkali resistant, aging resistant, and have ultra-strong weather resistance.

 

Scope of Application

●Suitable for new construction and maintenance projects of large buildings such as residential buildings, hotels, office buildings, schools, and hospitals;

●Can be directly applied to concrete surfaces, bluestone, red brick, and ceramic tiles.

 

Construction Methods

●Brush coating, roller coating, airless spraying

 

Product Specifications

●6 kg, 20 kg, 25 kg

 

Storage

●Store in a well-ventilated, cool and dry place, avoid direct sunlight, and prevent frost (storage temperature 5-35℃). Keep the container sealed.

 

Construction Process

 

Special Reminders

●After opening the lid of the paint, stir thoroughly with an electric mixer (more than 8 minutes). If the stirred paint is left to stand for more than 2 hours without application, it must be re-stirred. If not stirred evenly, powder shedding may occur;

●This coating does not form a film; the coating penetrates into the base layer. After the coating reacts with the glue contained in the putty, it is easy to produce an odor. It is recommended to use high-quality cement-based putty;

●For spraying or roller coating, after the roller is filled with paint, shake off the paint at both ends (to prevent paint from splashing onto the wall during roller coating), to prevent the paint from sagging due to gravity, the paint should be applied from bottom to top in a "Z" or "N" shape on the wall. Apply thinly; thick application may cause cracking;

●The product has super strong adhesion and is not easy to clean after pollution. Pay attention to the protection of finished products;

●Before directly applying to gypsum lines, please roll the gypsum lines with clean water once before applying the coating to prevent cracking;

●Roller coating: It is recommended to use high-quality short-pile rollers; Spraying: Airless sprayers must be used;

●If you encounter any construction problems, please contact the Gobayer Coatings Co., Ltd. Technical Application Department in time.

 

Safety Precautions

●Be sure to carefully read the construction instructions on the packaging before use to obtain reliable and satisfactory coating results;

●Workers must wear personal safety equipment (safety belts, safety helmets, etc.) before working at heights;

●For people with allergic skin, please wear protective equipment during use; If accidentally splashed in the eyes, immediately rinse with plenty of water and seek medical assistance;

●Do not allow children or pets to enter the construction area, and keep the product out of reach. If accidentally contaminated, immediately rinse with plenty of water and seek medical assistance. If the paint spills, cover it with sand or soil, collect it and dispose of it properly. Do not pour the paint into the sewer or drainpipe;

●Disposal of paint waste should comply with local environmental standards.